Following data tables are available in both unit systems:
Units in SI system (International System of Units, i.e. kg, m...)Units in EES system (English Engineering System, i.e. lb, ft...)Rubber Foam Properties Table
(Units in SI system)| Item No. | SBR | CR | CS |
| Density (g/cm^3) ... |
0.18 | 0.25 | 0.22 |
| Hardness (type C) ... |
8~12 | 4~8 | 6~10 |
| Original Sheet Size (cm) |
106*330 137*330 |
106*330 137*330 |
106*330 137*330 |
| Original Sheet Thickness (mm) |
30 30 |
30 30 |
30 30 |
| Tensile Strength (kg/cm^2) ... |
4.2 | 6.0 | 5.0 |
| Elongation (%) ... |
320 | 450 | 380 |
| Tear Strength (kg/cm) ... |
2.0 | 3.0 | 2.5 |
| Compression Set (%) | 7 | 5 | 6 |
| Resin Type | SBR | CR (Neoprene) | CR+SBR |
The above information is provided for reference only.
Ver. 20031222
 |
Back to Index page |
Units in SI system (International System of Units, i.e. kg, m...)Units in EES system (English Engineering System, i.e. lb, ft...)Rubber Foam Properties Table
(Units in EES system)| Item No. | SBR | CR | CS |
| Density (lb/ft^3) ... |
11.2 | 15.6 | 13.7 |
| Hardness (type C) ... |
8~12 | 4~8 | 6~10 |
| Original Sheet Size (inch) |
42*130 54*130 |
42*130 54*130 |
42*130 54*130 |
| Original Sheet Thickness (mm) |
30 (1.18") 30 (1.18") |
30 (1.18") 30 (1.18") |
30 (1.18") 30 (1.18") |
| Tensile Strength (PSI, lb/in^2) ... |
59.7 | 85.4 | 71.1 |
| Elongation (%) ... |
320 | 450 | 380 |
| Tear Strength (lb/in) ... |
11.2 | 16.8 | 14.0 |
| Compression Set (%) | 7 | 5 | 6 |
| Resin Type | SBR | CR (Neoprene) | CR+SBR |
The above information is provided for reference only.
Ver. 20031222
|
Back to Index page |